Arai GP-6S Full Face Helmet FIA 8859-2015 Approved
Arai GP-6S Full Face Motorsport Helmet. One of the lightest yet strongest helmets available on the market. New improved shape for extra comfort and to help when wearing a HANS Device. Brand new visor opening and adjusting system for ease of use and greater venting through new air inlets and outlets.
This Arai GP-6S helmet meets both FIA 8859-2015 and Snell SA2020 approvals meaning the helmet features M6 threaded inserts so that HANS posts can be fitted by the wearer. Please note, helmet does NOT come with HANS posts, these are sold separately (see linked product below).
Other features of the Arai GP-6S include:
Complex Laminate Construction (CLC) Enhanced Hyper Ridge shell strengthening in lower section Larger opening for increase ease when taking helmet on or off Single inlet and exhaust vents One large ventilation scoop (hole increased from 7.8mm to 10mm) Single ventilation slot at rear covered by Formula Duct (hole increased from 7.8mm to 10mm) Dual inlet chin vent Smaller portal visor aperture (60mm) Visor locking system with lever for easier opening (as recommended by IRL) 3mm thick, two-dimensional visor with F1 aluminium visor system prepared for the use of tear-offs (visor not interchangeable with GP-5) Improved visor pivot kit for better aerodynamics and visor operation Multi-Density Hybrid inner shell Approved Fire-resistant lining consisting of 3 materials, Carbon Nit®, Nomex® and *Conex® (*a new, more durable, surface material for high wear areas) Kevlar® chin strap F.I.A. approved for use with HANS® system Snell SA2010-8858 approved In order to select the correct size helmet, measure around your head starting at approximately 25mm above the eyebrows, then loop around the head, above the ears making sure you take the longest measurement possible.
Arai GP-6S Helmet is available from size XSmall (53cms) to XLarge (62cms). Please select required size from drop down menu above before putting item in your basket.
This Arai GP-6S helmet meets both FIA 8859-2015 and Snell SA2020 approvals meaning the helmet features M6 threaded inserts so that HANS posts can be fitted by the wearer. Please note, helmet does NOT come with HANS posts, these are sold separately (see linked product below).
Other features of the Arai GP-6S include:
Complex Laminate Construction (CLC) Enhanced Hyper Ridge shell strengthening in lower section Larger opening for increase ease when taking helmet on or off Single inlet and exhaust vents One large ventilation scoop (hole increased from 7.8mm to 10mm) Single ventilation slot at rear covered by Formula Duct (hole increased from 7.8mm to 10mm) Dual inlet chin vent Smaller portal visor aperture (60mm) Visor locking system with lever for easier opening (as recommended by IRL) 3mm thick, two-dimensional visor with F1 aluminium visor system prepared for the use of tear-offs (visor not interchangeable with GP-5) Improved visor pivot kit for better aerodynamics and visor operation Multi-Density Hybrid inner shell Approved Fire-resistant lining consisting of 3 materials, Carbon Nit®, Nomex® and *Conex® (*a new, more durable, surface material for high wear areas) Kevlar® chin strap F.I.A. approved for use with HANS® system Snell SA2010-8858 approved In order to select the correct size helmet, measure around your head starting at approximately 25mm above the eyebrows, then loop around the head, above the ears making sure you take the longest measurement possible.
Arai GP-6S Helmet is available from size XSmall (53cms) to XLarge (62cms). Please select required size from drop down menu above before putting item in your basket.
You may also wish to consider
Product Categories
Secure Shopping
