Cartek Gear Indicator Club Version
- Manufacturer:
- Cartek
- Click here for:
-
Gear Indicator Instructions Club
The Club Gear Indicator from Cartek has been designed as a dashboard mounted device to indicate to a driver the current selected transmission gear. It also has a sequential shift light display which can be set to indicate to the driver the best time to shift up a gear.
The selected gear is shown by a large, multi-coloured 7 segment numerical display whilst the shift light function is displayed towards the upper part of the unit by 8 multi-coloured LED's. These 8 LEDs form a display sequence that will commence at an engine speed prior to optimum and complete at precisely the optimum speed thereby giving the driver early indication to shift up before the rev limiter is reached or engine damage occurs. (Not suitable for engines with older CDI ignition systems).
Configure the lower and upper RPM settings with or without the engine running. Engine only needs to be revved to 50% of max RPM if setting up with engine running, or manually input RPM values using Push Button at rear of Gear Indicator.
Select from 6 LED display patterns for the Shift Light sequence and 7 Gear Indicator Digit Colours
Configure day and night brightness of the LEDs
Gear detection through RPM and Road speed signals, or through analogue signal input for Sequential Gearboxes.
Fully sealed for open-cockpit cars and motorcycles.
Additional RPM filter setting available designed for Historic applications.
More information and instructions for the Cartek Gear Indicator Club version can be found in the Technical tab above the product image.
The selected gear is shown by a large, multi-coloured 7 segment numerical display whilst the shift light function is displayed towards the upper part of the unit by 8 multi-coloured LED's. These 8 LEDs form a display sequence that will commence at an engine speed prior to optimum and complete at precisely the optimum speed thereby giving the driver early indication to shift up before the rev limiter is reached or engine damage occurs. (Not suitable for engines with older CDI ignition systems).
Configure the lower and upper RPM settings with or without the engine running. Engine only needs to be revved to 50% of max RPM if setting up with engine running, or manually input RPM values using Push Button at rear of Gear Indicator.
Select from 6 LED display patterns for the Shift Light sequence and 7 Gear Indicator Digit Colours
Configure day and night brightness of the LEDs
Gear detection through RPM and Road speed signals, or through analogue signal input for Sequential Gearboxes.
Fully sealed for open-cockpit cars and motorcycles.
Additional RPM filter setting available designed for Historic applications.
More information and instructions for the Cartek Gear Indicator Club version can be found in the Technical tab above the product image.
You may also wish to consider
Product Categories
Secure Shopping
