FIA Compliant Fuel Tank Vent Valve with AN6 Threads
- Manufacturer:
- Newton Equipment
- Click here for:
-
FIA Tank Vent Valve Dimensions
Newton have developed this new fuel tank vent valve to meet the FIA regulation, Appendix J - 258 for Fuel Cell Ventilation Systems. The VR series of fuel tank vent valves have three main functions:-
1. In normal driving conditions, the valve acts like a normal rollover valve meaning it closes off once the tank reaches more than a 90° incline. This prevents fuel escaping from the tank in the event of an emergency.
2. The tank vent valve contains a unique hollow aluminium flotation ball which shuts off any fuel that surges up the valve chamber during heavy cornering/braking.
3. When the valve is in the closed position, a 200 millibar by-pass prevents any pressure build up within the tank.
The Newton VRJ6-6 valve remains open to atmosphere at all times, unless under heavy forces caused by heavy braking, accelerating and cornering, or during an inversion (if the car rolls over in an accident). This valve is suitable for all forms of motorsport including F1.
Designed for remote or tank mounting; access to inside of tank is not required for installation. A 9/16” UNF (AN6) nut can be brazed or welded to the tank and a mounting hole made in the tank from the outside.
More information can be found at the Technical Info Tab.
1. In normal driving conditions, the valve acts like a normal rollover valve meaning it closes off once the tank reaches more than a 90° incline. This prevents fuel escaping from the tank in the event of an emergency.
2. The tank vent valve contains a unique hollow aluminium flotation ball which shuts off any fuel that surges up the valve chamber during heavy cornering/braking.
3. When the valve is in the closed position, a 200 millibar by-pass prevents any pressure build up within the tank.
The Newton VRJ6-6 valve remains open to atmosphere at all times, unless under heavy forces caused by heavy braking, accelerating and cornering, or during an inversion (if the car rolls over in an accident). This valve is suitable for all forms of motorsport including F1.
Designed for remote or tank mounting; access to inside of tank is not required for installation. A 9/16” UNF (AN6) nut can be brazed or welded to the tank and a mounting hole made in the tank from the outside.
More information can be found at the Technical Info Tab.
You may also wish to consider
Product Categories
Secure Shopping
