ITG Megaflow Air Filter JC50 Sausage Domed Type in Black
- Manufacturer:
- ITG
- Click here for:
-
ITG JC50 Specification Sheet
ITG JC50 sized domed 'Sausage' type filter with Black Nylon surround. Ideally suited for Classic and Vintage cars where the standard Red Nylon looks out of place.
ITG Megaflow foam air filter for JC50 size base plate. The JC50 model of ITG Air Filter is designed to suit twin carburettor applications and throttle body set-ups. This domed sausage type filter is hand built, and ideally suited where space is at a premium for when a standard JC50 will not fit.
The two outer layers of foam provide optimum filtration and load-up capacity whilst the inner layer is made from special self-extinguishing foam. These two layers combined give the very best air flow, engine protection and safety.
The ITG JC50 Sausage Air Filters are available in differing heights to help fitment for your application. ITG recommend fitting the tallest element possible, though a gap of 13mm (1/2") average must be left over the top of the filter for air to circulate. When using Ram pipes, there must be an absolute minimum gap of 19mm (3/4"), but preferably around 32mm (1 1/4") between the end of the ram pipe and the underside of the top of the filter.
Please select your required JC50 Air Filter internal height from the drop down menu above.
ITG Megaflow foam air filter for JC50 size base plate. The JC50 model of ITG Air Filter is designed to suit twin carburettor applications and throttle body set-ups. This domed sausage type filter is hand built, and ideally suited where space is at a premium for when a standard JC50 will not fit.
The two outer layers of foam provide optimum filtration and load-up capacity whilst the inner layer is made from special self-extinguishing foam. These two layers combined give the very best air flow, engine protection and safety.
The ITG JC50 Sausage Air Filters are available in differing heights to help fitment for your application. ITG recommend fitting the tallest element possible, though a gap of 13mm (1/2") average must be left over the top of the filter for air to circulate. When using Ram pipes, there must be an absolute minimum gap of 19mm (3/4"), but preferably around 32mm (1 1/4") between the end of the ram pipe and the underside of the top of the filter.
Please select your required JC50 Air Filter internal height from the drop down menu above.
You may also wish to consider
Product Categories
Secure Shopping
