Malpassi Filter King Regulator Small 67mm With 8mm Unions
- Manufacturer:
- FSE
- Click here for:
-
Filter King Spec Sheet
Genuine Malpassi Filter King Fuel Pressure Regulator 67mm with 8mm push-on type unions. Made in Italy. Malpassi fuel pressure regulators have been a common site within competition fuel systems on low pressure carburettor applications for many years. The Malpassi Filter King regulators are extremely popular as they both regulate and filter fuel without any restriction to fuel flow.
This FPR005 Filter King Fuel Regulator is the smaller of the two sizes available, commonly used on single Weber DCOE and other single carburettor set ups. Measures 125mm high, 100mm wide and has unions for 8mm push-on pipe. The 67mm is the diameter of the regulator body with the bowl measuring 50mm diameter by 52mm tall.
Small and precise pressure adjustments are made on the top by screwing the adjuster in or out after removing the cap nut.
The filter element inside is 10 Micron. Supplied in this kit is a steel mounting bracket and hardware.
Please see linked below the polished Sytec bracket for fitment, glass bowl to enable the filter inside to be seen without the need to remove the bowl and the replacement filter elements.
This FPR005 Filter King Fuel Regulator is the smaller of the two sizes available, commonly used on single Weber DCOE and other single carburettor set ups. Measures 125mm high, 100mm wide and has unions for 8mm push-on pipe. The 67mm is the diameter of the regulator body with the bowl measuring 50mm diameter by 52mm tall.
Small and precise pressure adjustments are made on the top by screwing the adjuster in or out after removing the cap nut.
The filter element inside is 10 Micron. Supplied in this kit is a steel mounting bracket and hardware.
Please see linked below the polished Sytec bracket for fitment, glass bowl to enable the filter inside to be seen without the need to remove the bowl and the replacement filter elements.
You may also wish to consider
Product Categories
Secure Shopping
