Mocal Oil Cooler 13 Row 1/2BSP (235mm Wide Matrix)
Mocal oil cooler 235mm matrix. 13 Row. 1/2BSP male unions on the top.
The Mocal oil cooler must be mounted so that they are protected from excessive vibration, rubber bobbins are ideal, and all 4 brackets should be used.
The hose runs to the cooler should not be rigid or exert tension on the unions.
Mounting should be in such a manner to minimise vibrations which can damage the delicate cores. A minimum of 4 mounting rubbers must be used to mount the cooler.
All Mocal Oil Coolers are made in England.
The Mocal oil cooler must be mounted so that they are protected from excessive vibration, rubber bobbins are ideal, and all 4 brackets should be used.
The hose runs to the cooler should not be rigid or exert tension on the unions.
Mounting should be in such a manner to minimise vibrations which can damage the delicate cores. A minimum of 4 mounting rubbers must be used to mount the cooler.
All Mocal Oil Coolers are made in England.
You may also wish to consider
Product Categories
Secure Shopping
