Smiths Voltage Stabiliser BR1307-00NEG
- Manufacturer:
- Smiths Gauges
- Click here for:
-
Voltage Stabiliser Instructions
Smiths Classic voltage stabiliser. Required for electrical fuel level, oil temperature and water temperature gauges which all require a 10 volt feed. One stabiliser will work no more than three gauges at once.
Wiring for the Stabiliser is a 12 volt feed to the terminal marked as 'B'. The terminal marked I is for the 10 Volt out of the stabiliser to go to the gauge. The stabiliser must be earthed separately and be mounted in the correct orientation. Only to be used with negative earth systems.
Smiths part number BR1307-00NEG.
Wiring for the Stabiliser is a 12 volt feed to the terminal marked as 'B'. The terminal marked I is for the 10 Volt out of the stabiliser to go to the gauge. The stabiliser must be earthed separately and be mounted in the correct orientation. Only to be used with negative earth systems.
Smiths part number BR1307-00NEG.
You may also wish to consider
Product Categories
Secure Shopping
