Stack ST700SR Street and Race Dash Display System
- Manufacturer:
- Stack
- Click here for:
-
ST700 Dash Info
The Stack ST700SR Dash Display System is an all-in-one display module, alternative to the more expensive ST8100 dash and is suitable for road use. The ST700SR is an 80mm diameter stepper motor powered tacho/rev counter that also has built in features including;
- Bright LCD display screen.
- Speedometer and odometer.
- User definable, super bright sequential shift lights.
- Battery voltmeter.
- White LED back lighting.
- Adjustable day and night back lighting levels.
- The body and face are fully sealed against dust and water to IP67 standard.
- Suitable for any engine with cylinder numbers that are shown on the dial face. (e.g 1, 2, 4, 6, 8 etc).
- Supplied with professional wiring loom, speed sensor, mounting hardware, switches and installation instructions.
To make the most of this dash system, there are a number of optional extras that can be fitted to it when the correct sensors and equipment are purchased. These include;
- 2 pressure or temperature inputs (Oil/Fuel Pressure, Water/Oil Temp).
- User definable temperature and pressure measurements.
- Lap timing.
- Split memory timing.
- Straight line and corner speeds.
This dash system can be used with the Stack GPS speed sensor, ST269589. This is a 'plug n play' sensor kit with a very easy calibration.
When fitting the pressure and/or temperature sensors, you will need to purchase the correct analogue sensor wiring loom also (ST918049).
Utilising the full capability of this dash system with the pressure and/or temperature sensors means you can then set your own high and low alarm warnings for these read outs. Alarm warnings are displayed by all 4 red LED shift lights flashing and a red LED triangle will light up. You can also set your defined 'RPM gates' for the alarms to be triggered. For example; If you set your low oil pressure alarm to 20 PSI and your engine oil pressure at 1000 RPM (idle) is 20 PSI, you can set the RPM gate to 2000 RPM to disable to the alarm coming on below this (at idle).
The Stack ST700SR is suitable for all negative earthed vehicles with both ECU and contact breaker/coil ignition systems.
Suitable Pressure Sensors: ST747 or ST745K
Suitable Temperature Sensors: ST764K or ST769
Please contact us if you have any questions or wish to discuss further the details and options of this dash system.
- Bright LCD display screen.
- Speedometer and odometer.
- User definable, super bright sequential shift lights.
- Battery voltmeter.
- White LED back lighting.
- Adjustable day and night back lighting levels.
- The body and face are fully sealed against dust and water to IP67 standard.
- Suitable for any engine with cylinder numbers that are shown on the dial face. (e.g 1, 2, 4, 6, 8 etc).
- Supplied with professional wiring loom, speed sensor, mounting hardware, switches and installation instructions.
To make the most of this dash system, there are a number of optional extras that can be fitted to it when the correct sensors and equipment are purchased. These include;
- 2 pressure or temperature inputs (Oil/Fuel Pressure, Water/Oil Temp).
- User definable temperature and pressure measurements.
- Lap timing.
- Split memory timing.
- Straight line and corner speeds.
This dash system can be used with the Stack GPS speed sensor, ST269589. This is a 'plug n play' sensor kit with a very easy calibration.
When fitting the pressure and/or temperature sensors, you will need to purchase the correct analogue sensor wiring loom also (ST918049).
Utilising the full capability of this dash system with the pressure and/or temperature sensors means you can then set your own high and low alarm warnings for these read outs. Alarm warnings are displayed by all 4 red LED shift lights flashing and a red LED triangle will light up. You can also set your defined 'RPM gates' for the alarms to be triggered. For example; If you set your low oil pressure alarm to 20 PSI and your engine oil pressure at 1000 RPM (idle) is 20 PSI, you can set the RPM gate to 2000 RPM to disable to the alarm coming on below this (at idle).
The Stack ST700SR is suitable for all negative earthed vehicles with both ECU and contact breaker/coil ignition systems.
Suitable Pressure Sensors: ST747 or ST745K
Suitable Temperature Sensors: ST764K or ST769
Please contact us if you have any questions or wish to discuss further the details and options of this dash system.
You may also wish to consider
Product Categories
Secure Shopping
